CLAMSHELL HEAT PRESS NEEDED TO APPLY SCREEN PRINTS. EASY PRESS WILL NOT BE SUFFICIENT
PLEASE READ ALL INFORMATION:
This listing is for the screen print Transfer ONLY. You will NOT receive any actual shirt. Shirts are shown simply to give you an idea of what the transfer will look like once you have applied it to a shirt.
WE DO NOT ACCEPT CANCELLATIONS, REFUNDS, RETURNS OR EXCHANGES!!! Sorry no exceptions. Please be sure your order is correct before clicking submit.
Production times varies on the screen print transfer. Typically, your order will ship within 2-4 business days however some delays may occur and orders may not be shipped for 5-7 days. Please note choosing priority shipping at checkout does not speed up the production time only the time it takes the post office to deliver your item.
SCREEN PRINT INFO:
We use the highest quality screens made out of plastisol ink. All screens are tested and proven to provide the best quality prints that can be applied to all different types of material when applied properly.
PRESSING INSTRUCTIONS
FOR ALL PRINTS: Press shirt for 5 seconds to remove wrinkles and moisture from material prior to applying screen print
Low Heat: PRESS SCREEN AT 350 DEGREES FOR COTTON MATERIAL 325 DEGREES FOR POLYESTER MATERIAL FOR 7 SECONDS. HOT PEEL
HEAVY PRESSURE 60PSI
NO TEFLON SHEETS/BONETS/PILLOWS
DO NOT WASH FOR 24-48 HOURS…NO DOWNY, WASH INSIDE OUT, LAY FLAT TO DRY
High Heat: PRESS SCREEN AT 375 DEGREES FOR 7 SECONDS. HOT PEEL
DO NOT WASH FOR 24-48 HOURS…NO DOWNY, WASH INSIDE OUT, LAY FLAT TO DRY
HEAVY PRESSURE 60PSI
PUFF PRINTS
Press Puff Screen Print at 350 degrees (unless otherwise stated on order form) for 7-10 seconds
Hot Peel
HEAVY PRESSURE 60PSI
DTF PRINTS
Press DTF at 300-310 degrees for cotton material, 260-280 degrees for polyester and blends
Press for 10 seconds, COLD PEEL
Cover with teflon, press again for 10 seconds
** Actual product colors may vary slightly from display photo to device display and monitor settings.
** We are NOT responsible for transfers that are pressed incorrectly. We highly suggest using an infrared thermometer to test the actual temperature of your heat press. Often our heat presses heat unevenly and inaccurately. Mine for example heats 30 degrees hotter than my setting on the front and 20 degrees hotter in the back so I have to adjust accordingly.
If you are brand new to pressing screens, please add note to order and I will add an extra “test print” to your order
Expedited shipping is available on any and all orders. PLEASE CLICK HERE TO ADD https://www.etsy.com/listing/1107038136/expedited-shipping?ref=shop_home_active_1